 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com NUMBER:RD-SDRJ-032 DATE : 2003/04/08 -C(REV:1) Single 10/100 BASE-TX Filtered Connector Module MODEL NO. : RJ-032 Features Fully shielded magnetics protect data from internally generated digital noise Reduces the overall length of the signal path for improved common mode performance Implements full common mode termination scheme with used and unused twisted pairs Meets IEEE802.3 Baseline Wander Compensation specification Integrates high voltage capacitor to chassis ground Supports all major transceivers with matched turns ration and complete integration of specified termination DESIGNFOR 100 BASE-TX TRANSMISSION OVER UTP-5 CABLE OPERATING TEMP RANGE:-40 TO +85 STORAGE TEMP RANGE:-55 TO +125 PRIMARY OCL INDUCTANCE: 350uH MIN AT100KHz/0.1Vrms 8mA DC BIAS Typical Performance Characteristics Differential to Insertion Loss (dB MAX) Return Loss (dB Min @100) Common Mode Rejection (dB MIN) MHz 0.3~100 -0.8 100~125 0.5~40 -1.2 -18 MHz 60 80 100 MHz 0.3~100 -35 20 MHz 40 60 80 100 MHz 0.3~100 -30 1500 Cross talk (dB MIN) CMRR (dB MIN) Isolation Voltage (Vrms min) -14.5 -12 -10 -47 -40 -37 -35 -33 Schematic: Design on MDI Interface Circuitry Taimag USA 55 Charles Drive Tewksbury Ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://www.Taimagusa.com NUMBER:RD-SDRJ-032 DATE : 2003/04/08 -C(REV:1) Dimension: mm TOLERANCE: 0.30 Ordering Information RJ RJ45 - 032 Series NO. Taimag USA 55 Charles Drive Tewksbury Ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://www.Taimagusa.com NUMBER:RD-SDRJ-032 DATE : 2003/04/08 -C(REV:1) Requirements 1.Design and Construction Product shall be of design, construction and physical dimensions specified on applicable product drawing. 2.Materials and Finish A. Contact: RJ Contact : Phosphor Bronze, Thickness=0.30mm Finish : (a) Contact Area : 30"min. Gold (b) Solder tail Area : 100"min. Tin/Lead(9:1) (c) Under plating : 50"min. Nickel over all RJ Joint Contact : Brass, Thickness=0.35mm Finish : 100"min. Tin/Lead(9:1) over 50"min. Nickel B. Plastic Part : (1) Set Housing : Thermoplastic, PBT, Black UL FILE NO. : E130155 Manufacturer : NAN YA PLASTICS CORP. Grade :1403G3 Flame Class : UL 94V-0 (2) Insert : Thermoplastic, PBT, Black UL FILE NO. : E130155 Manufacturer : MITSUI Petrochemical Industries Grade : CH230N Flame Class : UL 94V-0 (3) Spacer : Thermoplastic, PBT, Black UL FILE NO. : E130155 Manufacturer : NAN YA PLASTICS CORP. Grade : 1403G3 Flame Class : UL 94V-0 C. Shield Material : Cartridge t=0.25mm 10"-20" Thick Nickel over 10"-20" min Thick Nickel 3. Ratings (1) Voltage rating : 125 VAC (2) Current rating : 1.5A Durability : 1000 cycles with no function damage for RJ-45 . Abnormalities shall be present after the test. Low Level Contact Resistance : R=300m maximum (final) The sample should be mounted in the tester and fully mated and unmated 500 times per hour at the rate of 25mm/min. EIA-364-09C. Taimag USA 55 Charles Drive Tewksbury Ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://www.Taimagusa.com |
Price & Availability of RJ-032
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |